For example you have downloaded 32GB .img file from the Internet and you burned it to your SD card by using dd command in Linux:
dd if=pi.img bs=4M|pv|dd of=/dev/mmcblk0 bs=4M
Just to mention again, it’s good to have pv command in the middle in order to track progress of the write. Continue reading “Can’t mount partition copied from image file on your SD card”
Install the driver first from github:
sudo apt-get install git git clone https://github.com/abperiasamy/rtl8812AU_8821AU_linux cd rtl8812AU_8821AU_linux sudo cp -R . /usr/src/rtl8812AU_8821AU_linux-1.0 sudo dkms add -m rtl8812AU_8821AU_linux -v 1.0 sudo dkms build -m rtl8812AU_8821AU_linux -v 1.0 sudo dkms install -m rtl8812AU_8821AU_linux -v 1.0
Continue reading “Compile Realtek rtl8812AU/8821AU USB WiFi driver on Debian Jessie”
After a long time I got the urge to code something for our bellowed Commodore 64. Since it’s a pain to do it on a real machine, it takes a lot of time to set everything up since I do not have permanent location for my C64 in the apartment.
Continue reading “Configure Sublime Editor with KickAss on Debian 8 Jessie”
Recently I have made some physical changes to my home network. Moved the WiFi router to a more central position to get better coverage, but that meant also my main media player running Xbian could no longer be connected via Ethernet cable, but had to switch to WLAN.
Well wireless adapter on Pi3 is ok for basic stuff, but it does not have good antenna to achieve better network quality or it could run at least 150Mbits which I required. Continue reading “Use two wireless network interfaces on Raspberry Pi 3”
In order to document all the stuff I have done during my C64 era, I am trying to collect all the works. Continue reading “Vitality #3 by Albion Crew”